Wednesday, 6 March 2013

Second Knight



The final piece to be painted in the Feora1 50 point army was the second Knight Exemplar Seneschal (KES).  I’ve tried to make a trio of lists for competition purposes, each fielding some different units and ‘jacks to keep me going painting-wise; but still be competitive – hence the Idrians and KES.  I've fielded this trio: Feora1, Feora2 and Kreoss1 at 35 points in a Masters event at York a month ago, I've scaled it up to 50 and intend to field it again in another month at Bridgeford Bloodshed 1.

These KES solo’s are pretty decent in melee and when they get angry hit pretty hard and accurately – they’ve been useful in blocking charge lanes, contesting scenario elements and generally being a pain in the ass for my opponents!  Further tactics can be read in the first article I wrote on KES here.

The latest KES has a hero pose, I deliberately mounted him on a sloping rocky base and to further differentiate him from his buddy I chopped his left arm off and reposed it in a similar way to how the Errant Officer holds his sword, very simple to do – I just used a razor saw at the correct angle and inserted a pin to ensure the joint held.

I decided to paint the new KES in a similar way to his brother, but I used a greater amount of purple armour and much less white, though I maintained the same gold trim, sanguine clothing and brown/red banners for continuity.  There isn’t much more to say regards the paint job as again it follows the same scheme I have discussed throughout this blog.  Following the finished KES photos are a few more Idrian photos – hopefully these will look better than the ones in the previous article!

Knight Exemplar Seneschal - rear
Knight Exemplar Seneschal - front
 
Knight Exemplar Seneschal - side

Knight Exemplar Seneschal - side
Knight Exemplar Seneschals
Knight Exemplar Seneschal - front
 More Idrians (better lighting):





Friday, 1 March 2013

Desert dwellers


Idrian Skirmishers -  Source
This entry is focussing on Idrian Skirmishers; perhaps one of the less favourite units available to the Protectorate.  They are a mercenary ally unit, but considered faction when building a Menoth army.  When you first look at their abilities you will quickly notice that they have an abundance of skills and an average stat line.  The UA further adds to this and presents even more options and expertise.  As a result this unit is quite expensive; 6-10 for the unit and 3 points for the UA, so 13 points for a full unit with officer attachment.

I won’t make this article a full tactica article, but rather a taster of the Idrian unit.  As noted above they have a swathe of skills and abilities, I’ll include the UA’s in this section too as generally speaking it is worth the three points if you’re investing in a unit of Idrians.  They’ve got Advance Deployment and Pathfinder as well as CRA as standard, so pretty useful from the off.  They all come armed with a Kopis melee weapon and a military rifle for ranged.  They’re mediocre stats (MAT6 and RAT5) make the P&S10 Kopis and POW11 military rifle fairly unremarkable, however given that they have CRA a pair combining will make an effective RAT7 POW13 RNG 10” gun, this is quite tasty.  Obviously they can combine further for greater accuracy and hitting power depending on the target.  I do feel that you pay a premium for these abilities and at one point per model are probably about right – I think they get compared to Errants (quite often) which are cheaper and better, but I’ll just discuss the merits of just the Idrians in this article.

Defensively the Idrians are again mediocre, DEF13 and ARM12 means that they will likely die to a half decent attempt, they do however come with Camouflage as standard adding a further +2 to any defensive terrain bonuses, therefore behind a wall they are DEF19 from shooting.  Clearly that is pretty darn good, but most enemy armies will have a method of dealing with this, i.e. sprays, AoE’s or possibly units which ignore these benefits – Hunter for example.

Idrian Skirmisher Chieftain & Guide - Source

The UA, Chieftain and Guide, come in at a whopping three points, but you do get quite a bit for that investment, CMA as a tactic meaning that the Idrians can now mix it up in melee as well as shooting (mitigating the mediocre MAT6/P&S10 against High DEF/ARM targets).  The Chieftain also adds the Assault & Battery order, which will get you quite a lot of attacks, or could be used as a pseudo Bushwack, so you shoot and then must run or charge – disadvantage here is that you can’t CRA or CMA (though I’m not 100% certain as I type this – it could be a real ball-buster if you can)!  The Guide is perhaps the real icing on the cake as he provides Prey and Go to Ground as a mini-feat.  Prey is fantastic as it raises the Idrians mediocre offensive stats to elite trooper/solo standard and allows the Idrians to kick some ass; as they can Advance Deploy it allows you to place your Idrians right opposite your intended prey-nice!  The mini-feat is useful as a first turn run and go up to DEF19 from shooting (it grants cover), it also defends against AoE’s as it makes the Idrians immune to blast damage for a round – again less effective if the enemy can by-pass this defence.

At present I’ve been running them with Feora1, though a Defender’s Ward ‘caster would get much more mileage out of them.  Feora1 does nothing much for the Idrian’s, but I picked them because they’re fairly self-sufficient and capable of dealing with almost any threat.  They haven’t done anything particularly impressive, but have been fairly solid never-the-less.  One thing I have found is that I’ve expected more of them on occasion and they haven’t delivered, it might be just some bad dice rolling on my part, but I felt they let me down on a few occasions.  I think that most serious players won’t take them as they cost a lot of points and don’t tend to give that much back, as I touched on above other units are far cheaper and arguably more effective so I doubt they will see much competitive play.  On the flip side not many people know what they do and therefore have that ‘Dark Horse’ aspect to them!

Idrian painting
I painted my Idrians as a block of twelve models, which took ages, hence the gap in between blog entries.  As a mercenary ally unit they do not conform to standard Protectorate models.  They are almost polar opposites with flesh aplenty, leather armour and lots of pouches/bling.  They have a Red Indian look to them in the artwork and skin tone would be important when painting these.
Completed Idrian unit
Metals:
As the Idrians don’t wear plate or mail armour like the abundant Exemplar or Flameguard units and are desert dwellers I tried to make them stand apart, but still have some ties to the main army.  I decided after spending a long time studying the models that the metal would be mainly silver with very little gold and the metal would be quite rustic, not polished steel blades that you’d expect in the main Protectorate army.  I used lots of washes to achieve this effect, the old Citadel Flesh Wash as well as the OOP Citadel Washes such as Grippone Sepia.  Metals were drybrushed first from Tin Bitz through to Chainmail, I opted not to layer paint the blades to maintain the rustic look I sought.

Clothing:
The Idrian clothing had a lot of leather armour which were various tan and brown shades washed with various old Citadel inks washes, some had metal plates which were again weathered like the swords.  The cloaks were painted to reflect the camouflage aspect of the Idrian unit and had an earthy tone, these were layer painted (adding Menoth White Highlight to the mix to tie the Idrians to the existing Protectorate units).  I further tied the Idrians to my paint scheme by adding in purple sashes on models which had them – this colour being unique to my personal Protectorate force – alternatively I could have painted pure Menoth White.

Skin:
This was perhaps the most perplexing aspect of the paint job, as noted above they’re like Native American Red Indians and had a different tone to anything I’ve ever painted before.  I did quite a bit of research on the internet and didn’t really find anything I found useful.  I ended up basing the flesh with P3 Midlund Flesh as I have done for many other miniatures, including the existing Protectorate units.  I differed my technique at this point and mixed the old Citadel Flesh Ink with the old Citadel Ogryn Flesh wash, keeping the ink quite strong.  I added a tiny amount of medium and washed the entire flesh tone.  As I predicted the increased ink content made a dark wash and strongly tinted the Midlund Flesh.  After this I re-washed the skin with pure Ogryn Flesh, I did this to make the skin tone matte – inks tend to leave a shiny finish and this dulled it back down.  With the dark tone complete I re-highlighted the flesh with the basecoat leaving the muscle definition created by the wash.  For the highlighting proper I mixed increasing amounts of the old Citadel Bronzed Flesh colour along with medium to the Midlund Flesh basecoat.  I think this gave me a different skin tone to the other Protectorate units, although it doesn’t really look how I envisaged the end result.  I contemplated making a glaze to tint the finished flesh to a more Red Indian skin, maybe using Baal Red or possibly making my own glaze with P3 Sanguine Base.  I didn’t do the latter because the Idrians looked suitably different and the flesh had come out quite nicely – glazing it might have ended up being counter productive.

Below are a series of glamour shots of the completed unit:

Chieftain & Guide
Chieftain & Guide

Idrian troopers - front
Idrian troopers - rear
Idrian troopers - close-up
 Thanks for reading :-)




Friday, 25 January 2013

Moving forwards


It has been a while since my last blog entry, though people who know me know that I’ve been having a really tough time health-wise lately and to be honest still aren’t right, though on a positive note I’ve been feeling somewhat better of late and well enough to paint so I’ve photographed a few of my latest bits and pieces:

Feora, Priestess of the Flame
This warcaster is one that I have been trying out lately, loosing most of the games I have played using her, though of late I’ve won a couple, so she got painted up!  Gaming-wise she isn’t renown for being in the Protectorate’s top tier of warcasters, however I think she has a good spell list and a potentially devastating feat as well as being survivable.  Like her more popular epic counterpart she has a defensive stat of 15 and armour 17.  With the recent release of SR2013 the scenarios reward ‘casters who stick their necks out and Dominate flags, objectives and zones, basically scoring double control points; clearly the down side to sticking a ‘caster in harms-way is assassination in the following turn – hence survivable warcaster choices.  I’ll endeavour to write up a tactica on Feora1 once I’ve got to grips with using her and formulated a list that synergises with her and SR2013.

Regards painting Feora1, techniques were identical to previous articles, though I did spend quite some time getting the gold right, this being the first stage as I tend to with painting Protectorate models.  I also focused on getting a smooth Menoth White blend on the cloak/armour and spent some time ink lining to lift the colours where necessary:





  
Knights Exemplar Seneschal
This model has seldom seen play for SR2011 and SR2012, however I think with the recent meta-shift to Colossals and Gargantuans as well as the scenario focus of SR2013 this piece will find a niche.  As a basic description he is a fairly fast infantry solo who hits hard and with buffs and a bit of good luck could possibly trash a heavy, but I don’t include him for that as a main reason, but rather his Restoration rule.  Basically if the Knights Exemplar Seneschal (KES) is killed he just remains disabled and doesn’t get boxed or destroyed, so he can’t be removed from play easily.  The KES then heals damage for each living faction model destroyed in his CMD.  The key is that the KES remains in play during your opponents turn and isn’t removed until the Protectorate players following Maintenance Phase, this therefore prevents an opponent from scoring.  The KES can also be used to ‘jam up’ a large based model, such as a heavy or Colossal forcing the opposing player to trample instead of charging – this burns initial attack(s), negates the extra damage dice for a charge attack and costs a focus or fury for the power attack leaving only ‘bought attacks’.  Of course if you’re Dave and playing Sorscha2 it doesn’t matter as Konquest will smash whatever it likes, especially Avatar’s that are gazing at it and Nick forgot to Enliven (again)!!!

The KES was painted at the same time as feora1, simply to speed up painting time and save on my ever depleting paint supplies!  The model is really nice as it has a dramatic pose and the long flowing banners and clothing allow for some nice blending:
 




Reclaimer
This model is a ‘jack support piece who again saw little table-time in SR2011 and SR2012, but might see more in 2013.  Basically he gathers souls of fallen faction models and can convert that to focus and hand it out to a ‘jack as a *action.  Effectively gathering free focus allowing the Wracaster to camp more; something quintessential when Dominating and under risk of assassination.  Wracks and the Heirophant can also aid in this, but perhaps when list building too much support can be a downfall.

The Reclaimer differs slightly from other Protectorate models in that his clothing is black, probably because he collects souls and isn’t part of the Protectorate clergy, or maybe it is just a fashion thing!  Still it was interesting to paint this model and for the black robes I chose to mix increasing amounts of Menoth White Base to Tharmar Black, making a grey highlight.  I chose this colour as it would balance with the remainder of the Protectorate army which has extensive amounts of Menoth White Base/Highlight as a foundation colour:



Next up a 2013 Masters tournament to be held at York and a 75 point event to be held in Sheffield, some thoughts on list building as well as any relevant painting, thanks for reading :-)

Wednesday, 19 December 2012

Judgement Day


It has been a few weeks since my last blog post, but the fires of industry have been burning and Konquest has a new playmate – Judge Judy!

Judicator source - www.Privateer Press.com
Assembly
I eagerly awaited the release of the Protectorate Colossal and set to work building it as soon as it arrived, similarly to Konquest she was built and painted in several sections:

· Base
· Legs and lower torso (rear skirt detached for painting)
· Upper torso (head and shields detached for painting)
· Left arm (hand detached for painting)
· Right arm (hand detached for painting)
· Missile pods

Building and painting in sections is something I find easier, especially with large scale models such as Colossals, simply holding such a heavy and large base for several hours can be difficult as well as getting a good paint job in all the nooks and crannies should it be assembled as one.  Conversely holding a section, an arm for example, to paint can be awkward too as laying it down can ruin paint work, or you might accidentally get finger prints embedded into soft, drying paint so choosing the best method is quite tricky!

Conversions
Perhaps the first thing you’ll notice about my Judy is that I converted the flame thrower weapons.  I really disliked the ‘machine-gun jubblies’ look, as well as the impracticality aspect of the weapons themselves; i.e. they wouldn’t be able to be effective weapons where they were positioned.  Therefore I decided to re-position the flamethrowers on the arms, behind the hand, allowing them to stand proud of the vambrace armour and be seen.  The flame throwers sit quite easily here and I just added greenstuff to extend the inner armour and make the join as seamless as possible.  I contemplated filing down the ball part of the flamethrower and adding some tubing, but this would all be hidden by the hands once they were glued in place.  To hide the two concave socket joints where the flame throwers should sit in the Judicators upper torso I used two spare plastic Errant shields that I didn’t use and had kept in my bitz box.  I angled the concave sockets slightly to accommodate the two shields and filled the void with greenstuff.  Below are a couple of photos of those conversions for your reference:


Gap filling, pinning and filing
The Judicator had a lot of flash as well as gaps which needed filling.  Reading various internet forum posts this had been an issue for some people, however it was pretty much what I was expecting so I wasn’t overly bothered myself.  If you are following this article prior to building your own Judy, it is best to leave the gap at the top of the upper torso assembly and greenstuff it later.  It is hard to explain but if you dryfit the metal and plastic pieces it is apparent that they don’t fit as they should and a 3-4mm gap is inevitable!  Also the siting of the missile pods is awkward and this will inhibit how dynamically you can pose the arms, the shoulder pads will interfere if they are rotated too much.  It is also definitely worth taking the time to pin the big joints and those that are weak, such as the arms to body as well as the upper and lower torsos.  As I painted the rear ‘skirt’ separately it had to be pinned also, if glued in the initial assembly I suspect it would be ok without a pin, just that gluing painted parts to painted parts yields a weaker bond.  Also another good tip is to pin the missile pod doors, the contact here is tiny so lots of patience is recommended, oh and a small drill bit!  A few of the WIP shots below show the positions of the main pins as well as up close details of the paint job in sections:

Base WIP, showing pins for feet

Legs and base complete

Upper torso complete 1

Upper torso complete 2
Painting
As indicated above I found it easier to paint the Judicator in several discreet sections and worked from the base upwards.  The colours for the Judicator were exactly the same as previous articles, the gold being the first stage, given the messy nature of drybrushing and washing.  One small change was my daylight lamp decided to go kaput and I ended up purchasing a new lamp, the new lamp has a ‘white light’ and has a tube rather than a bulb.  The light I bought is designed to aid partially sighted people and it has the effect of showing imperfections in painting up.  Basically it has improved my layering because it shows up the different shades more harshly, therefore you end up making closer, less harsh shades and under normal light the layering looks more seamless.  It is kind of like when you take a flash photo of a model and it makes it look a bit naff!  I did quite a lot of highlighting of the gold plate with P3 Solid gold on most of the protruding gold leaf and embellishments as well as the gold rivets, this was augmented by a lot of black ink lining, the latter is absolutely painstaking, it takes ages and needs a really steady hand, but the delineation between two surfaces looks so much neater and makes the model stand out - definitely worth the time IMO.

Below are a series of photos of the finished Judge Judy:






Judge Judy in action
So with Judy getting her paint job I had a couple of opportunities to playtest her.  I chose to field her with Feora2, the pair seemed destined to fit together, heck I think Feora features quite strongly in the Colossals book fiction!  My thoughts on Judge Judy is that she is a great piece for the Protectorate and enjoyable to play.  The Judicator has great infantry clearing skills as well as being able to kill any heavy target in the game.  Feora2 augments the Protectorates already great ‘jack buffing abilities by giving Judge Judy 2” of much needed extra speed, whilst buffing Feora’s armour with the Escort spell.  The bond adds that extra melee attack or boost, but more importantly grants Judge Judy continuous fire on all of its weapon systems allowing the missile pods to cause more havoc than you would believe against infantry.  Feora2 also has the Ignite spell which grants Judge Judy +2 STR to her melee weapons giving a frightening number of very accurate high P&S attacks.

I’ve run the Judicator at 50 points and 35, it seems like a squeeze at 35 but quite do-able: 50 points however gets you all of the toys…  I found that a Reckoner is a welcome addition to the Battlegroup as its Flare helps to counter the Judicator’s Inaccurate rule when shooting high ARM, low DEF targets, clearly the Hymn of Battle, aiming and boosting to hit all aid accuracy further.

A couple of examples of where Judy has passed judgement were as follows:
Infantry:  Carpet bombing high DEF Satyxis Raiders who were immune to blast damage, basically they ignore the AOE blast, but are susceptible to the continuous fire.  Similarly any unit of high DEF or stealthed infantry can be targeted by Judy from a considerable distance and the inaccurate rule really doesn’t make any difference so she can be quite focus efficient.  The free focus can be used when fishing for solos or UA’s to boost the damage and hopefully kill outright or maim sufficiently for the continuous fire to finish off in the opponents next Maintenance Phase.

Hard target (from range):  My Judy combined its firepower with a Reckoner and Battle Engine to judge Mulg, the two fully boosted rocket pods were shooting at an effective RAT7 plus 3D6 and damaging at POW16 plus 3D6, with all the buffs.  With the new SR2013 destroying enemy objectives from afar will be another strong use.

Hard target (melee):  My Judy had the opportunity to judge a Kraken, the Cryx Colossal, receiving four focus, the Hymn of Battle and under the Ignite spell it just didn’t seem fair.  In the last example I had received a charge from Kraken and lived, though had dice gone my opponents way then Judy would likely have been destroyed.  In another game I had the opportunity to judge a Conquest, but had to trample over half a dozen infantry to get there.  I did have the ‘alpha strike’, but even with Battle and Ignite three bought attacks simply wasn’t enough and it was Judy who was judged!!!

YOU will be judged!!!